Furniture. Tests for surface finishes - Assessment of resistance to dry heat1 Scope This part of ISO 4211 specifies a method for the assessment of the resistance to dry heat of all rigid furniture surfaces regardless of materials. It does not apply to leather and textile surfaces. The test is intended to be carried out on a part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product and of a size sufficient to meet the requirements of the

Hollow products having an outside diameter greater than 80 mm and/or a wall thickness less than 2 mm are specified in BS EN 12449

only the hydrochloric acid method (Clause 5) is applicable

Illuminated signs

There are three levels of standards dealing with non-active surgical implants and related instrumentation

PAS 8820 is applicable to alkali-activated cementitious material that has been developed to fill the gap and encourage the use of AACMs in the construction industry

2 - Titanium (III) chloride reduction methods for the determination of total iron content for

surface finish of jointing faces

Standing step ladders with platforms and mobile ladders with platforms

the automotive industry

wick-induced test

Circuit-breakers in compliance with this document are suitable for use in TN

using gas chromatography