RDL DD-BN40 Wall Mount 4-In 4-Out Mic/Line to Dante Interface (White)The DD BN40 is a complete wall mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear panel detachable terminal block. Special software is not required to configure the DD BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects

Features: Low Battery/Overmodulation (BAT/OM) Light

High performance Eclipse transformer for optimal signal transfer

The low impedance transformer coupled output - below 50 ohms - is capable of driving long lines with unrivaled high frequency performance

easily supplied by most communications panels designed with 1/4 inputs

The output levels are fixed at nominal unity gain

and not just in your ear

The PRM1 employs a 1/4" pre-polarized electret-condenser capsule and has an omnidirectional polar pattern

Matching blank panels are also available to cover any empty slots

A tunable tracking front end filter is featured in the QRX200 so you can receive any frequency in any block from 20 through 27 or 512 - 698 MHz while still filtering out unwanted RF

ka On Air Mic Arms with litt's incomparable and Red Dot Award-winning CleanVision® lighting characteristics

The Shure Model SCM800 is a full-featured

The RU-FN modules are Dante audio network interface products compatible with RDL Format-A twisted pair products